★★★★★
Full femur coverage matters
Most "leg" splints stop at the knee. This one wraps the whole femur — femoral shaft fractures stabilise properly.
Long-format Deluxe Extremity Vacuum Splint for full-leg and femoral immobilisation — also usable as a make-shift dislocated-shoulder splint.
The Full Femoral Extremity Splint is made from our reinforced polyurethane material — highly durable, and long enough to immobilise the full length of the femur. The same geometry that wraps a thigh also makes it an effective make-shift splint for dislocated shoulders. Available as a single unit, or bundled with the SUPER Deluxe Extremity Splint Set (MT80200) when you need the complete extremity kit.
| Product code | DL20005 |
|---|---|
| Indication | Full femoral / full-leg immobilisation; dislocated shoulder (off-label) |
| Splint system | Patented Multi-Chamber System |
| Material | Reinforced polyurethane (PVC-free) |
| Imaging | X-Ray translucent · MRI safe up to 3T |
| Cleaning | Machine-washable up to 60 °C / 160 °F (valve closed) |
| Certification | CE · FDA · ISO 13485 |
| Warranty | 5 years |
| Origin | Made in USA |
Application. No need to remove clothing. Confirm the valve is tightly closed, then fold the splint around the leg — avoid moving the limb as much as possible — and fasten the Velcro. Attach the pump to the valve and suck air out until the splint becomes rigid. Keep pumping until no more air comes out; you cannot pump too much, only too little. Re-open the Velcro briefly to fine-tune the fit.
Spine-board pairing. When used with a Vacuum Spine Board or Vacuum Spine Immobilizer, apply this splint before placing the patient in the full-body device.
Removal. Open Velcro, then open the valve slowly — about four turns is enough. Do not remove the nozzle entirely unless you are replacing it.
Cleaning. Always close the valve before cleaning. Scrub blood or mucus with cold water before it dries, then wash with normal detergent in hot water; apply disinfectant per protocol. Machine-washable at 60 °C / 160 °F (cold cycle for biological fluids). Hang to dry.
Maintenance. Regularly verify the valve is functional and seated in the correct track.
CE marked, FDA cleared, manufactured under ISO 13485. PVC-free. X-ray translucent and MRI-safe up to 3T. Validated for use with the Med Tech Sweden Vacuum Cervical Collar, Vacuum Spine Board and the complete spinal support system.
Single units ship from Sollentuna within 48 h across the EU. Bulk pricing breaks at 10, 50 and 200 units. Tender quotes accepted in EUR / USD / GBP. Contact an engineer for fleet pricing.
Most "leg" splints stop at the knee. This one wraps the whole femur — femoral shaft fractures stabilise properly.
Used it as a make-shift shoulder splint on a kayaker dislocation. Worked exactly as the maker suggested.
Below freezing on a moose-collision call last winter. Splint moulded fine; valve seated; no air leaks at -22°C.
Bought as a replacement for the Super Deluxe set. Arrived in a week. Identical to the original piece — half-star off only because the catalogue could make this clearer.
Bought this product? We publish every verified review, positive or critical — your operational notes help the next crew choose right.
Submit your review →